Orchard Palisade Gate

  A traditional entrance Gate, Frame, ledged and braced with the strength, beauty and durability of class 3 graded Douglas. Domed top across stiles and palisade top. Traditional mortice and tenon joinery 20mm x 70mm infill with a smooth finish with the choice of three spacings between palisade uprights 20mm, 45mm, 70mm

These Gates are supplied with Hardware.  

Maximum width for each leaf 1.20m and a maximum height to the top of dome 1.90m. Bespoke widths or heights can be had as long as it is below our maximum. For more information please contact us.

95mm x 45mm Stiles

Hardware included see images  

Available in galvanised or epoxy black,

Band & Hook hinge set, ring latch or auto Latch. 

information, the Band & Hook hinges included are designed to go on the rear or front of the post or pillar not in-between and can open 180° and are hung on hooks on plates.

Orchard domed top Palisade Gate

Price includes TVA

Hardware included 

​

Height 1.90m to centre of arch

Width with 20mm spacing between slats

1.0m      289.00 €  to fit a 1.03m opening

1.20m    346.00 €  to fit a 1.23m opening

​

Height 1.90m to centre of arch

Width with 45mm spacing between slats

1.0m      269.00 €  to fit a 1.03m opening

1.20m    322.00 €  to fit a 1.23m opening

​

Height 1.90m to centre of arch

Width with 70mm spacing between slats

1.0m      259.00 €  to fit a 1.03m opening

1.20m    310.00 €  to fit a 1.23m opening

Height 1.20m to centre of arch

Width with 20mm spacing between slats

1.0m      185.00 €  to fit a 1.03m opening

1.20m    221.00 €  to fit a 1.23m opening

​

Height 1.20m to centre of arch

Width with 45mm spacing between slats

1.0m      169.00 €  to fit a 1.03m opening

1.20m    203.00 €  to fit a 1.23m opening

​

Height 1.20m to centre of arch

Width with 70mm spacing between slats

1.0m      162.00 €  to fit a 1.03m opening

1.20m    194.00 €  to fit a 1.23m opening

Bespoke sizes available up to a maximum of 1.90m high to top of dome 1.20m wide 

​

Note on installation. When installing please allow 60mm extra between posts or pillars for double gates and 30mm for a single gate. 

Example, a Gate of 900mm would need an opening of 930mm alowing 30mm for spacing

Hardware supplied with these Gates

Click image for more info

The products below can be added to your Gate and are available in Galvanised or Epoxy Black, Please visit our Hardware store  for  more items to enhance your Gate.